Anker’s Ultra Slim Extended Battery Case offers the best mix of good performance, price for the capacity, and physical size (the quantity of bulk it increases the phone). It has the capacity to deliver 117 percent of the full charge to a iPhone 6 or 108 percent with an iPhone 6s. The price tag, $40 at the writing, is crazy low to get a battery case: In that rate, the Ultra Slim delivers the best charge value (a 2.9 percent charge per dollar, or $34.34 for any full charge, for the iPhone 6) of any one of the cases we tested, undoubtedly.
The Ultra Slim doesn’t have an especially premium feel. That’s not to imply that it comes off as cheap, but nothing about its physical construction is particularly impressive next to other cases. Another minor strike against this Anker case is its deficiency of button coverage; we almost always prefer (well-designed) press-through button covers that protect the iPhone’s various buttons and reduce the volume of places where dust and dirt can get below the iphone6 case supplier.
To the iPhone 6 Plus and 6s Plus
Anker doesn’t make an Ultra Slim for the iPhone 6 Plus or 6s Plus, so for those handsets, we love the Tylt Energi Sliding Power Case. Unlike a lot of the models we tested, this one features a separate protective case that you could slide out from the battery sled if you don’t require the extra power, which makes it a more-practical option for the already huge Plus models. It’s yet another great source of energy, providing generally a 93 percent charge towards the iPhone 6s Plus in our tests.
A vital thing to consider with the cases we dismiss below is simply because they will not be necessarily bad. Although we’re noting any issues we saw using these cases, some of them are fine-they merely can’t quite match up to the good quality in our picks.
Our previous pick for a more protective case was Speck’s CandyShell. A perennial favorite, it provides two layers of material-plastic externally, rubber internally-that offer more protection than case designs which can be just one or maybe the other. The CandyShell is 10.9 mm thick, which puts it in the chunky side, but it doesn’t feel exceptionally bulky, and it’s one in the only cases we tested which claim to fulfill military drop-test standards. Speck supplies the case in a wide range of colors, and variants add rubbery grips (CandyShell Grip), credit card holders (CandyShell Card), and graphic prints (CandyShell Inked).
The CandyShell includes a few conditions that keep it from as a top pick, though. First of all, the CandyShell’s glossy back right away attracts small scratches that generally aren’t visible go on but jump out if you observe the iPhone in an angle. Granted, these scratches don’t impact the protection the way it is offers-and we’re obviously happier to discover scratches on the case as an alternative to in the phone itself-but it might be nice if Speck were to give the case having a matte finish.
One other dilemma is the case’s shape. A lot of our readers, in addition to a contingent of Amazon reviewers, take issue with the point that the CandyShell’s back is slightly convex. More specifically, when you set the truth with a flat surface, this “hump” causes the case to rock when you press along any one of its edges, or to spin similar to a top if you push it. (If you got a new CandyShell so you mind this spinning and rocking, Speck says to contact its support service department.)
OnePlus (the Android phone maker) surprisingly decided to get in around the iPhone-case game having its Sandstone Case. The large draw is OnePlus’s Sandstone texture; TIME says that it “feels like smooth sandpaper” and therefore “[i]t’s super grippy, which makes it tough to drop.” Unfortunately the case can be a shell with open top and bottom edges, meaning it’s less protective than a good case must be. For this reason design drawback, it fell out from competition.
SwitchEasy features a mixed history, one that makes it tough to tell the entire story based on its cases alone. Its Numbers case was our original pick for your iPhone 5 and 5s, before a wave of reader complaints about quality and customer service. The answers we got from SwitchEasy weren’t thorough; mostly, the business blamed the issues on third-parties selling knockoffs of the products. (At iLounge, I came across the SwitchEasy protectors to become impressive generally speaking-the Numbers earned a rare A rating from me-but readers there contacted me about similar issues.) Ultimately, we pulled our recommendation.
With all that in mind, we considered three SwitchEasy cases to the iPhone 6. The first is the Odyssey. Like some of the better cases we’ve evaluated, it’s a mixture of plastic and rubber. As opposed to being layered, the types of materials run alongside, together with the hardened rubber making up the majority of the case. It isn’t the prettiest case, in your opinion, yet it is protective. It covers the buttons without reducing much of their clickiness, and six holes along tha harsh truth up precisely with all the speaker vents. The most popular part of the case will be the port protection: Rubber protectors match the headphone and Lightning ports, respectively, when they’re not being used, keeping dust and also other debris out.
SwitchEasy’s Tones includes the same port protection and uses a similar materials. Your body is generally plastic, though, with all the rubber walking around the sides being a border and also across the rear of the way it is, matching the iPhone’s antenna lines. We’d want a layer of rubber between the handset and the plastic back from the TPU iphone6 case supplier, and also the Sleep/Wake button needs a bit too much pressure around the number of units we tested.
Our initial impressions of SwitchEasy’s Numbers were very positive-we had been ready to name it as being our top pick-but there’s considerably more on the story than just our review units, and we found a substantial fault after a little extended use. This example is nearly just like the Incipio NGP, nevertheless it provides more protection. Rather than leaving the phone’s ports totally exposed, the case provides protectors which fit in to the headphone-jack and Lightning-port openings to help keep dust and debris out. It’s a good touch that’s executed well. Even phone’s speaker is much better protected, with six individual holes instead of one long opening. We actually just like the tactility from the devqpky94 a little more with SwitchEasy’s model than with Incipio’s case, too. A young yellow version in the case we tested accumulated permanent stains, but later iterations exhibited no such issue. However , the way it is is a little too loose, hence the corners come off too easily. We experienced this matter again and again while eliminating the encased phone from your pockets. Because we’ve had other conditions with SwitchEasy cases previously, we’re still a bit wary. Should you do choose to invest in a SwitchEasy case, we recommend buying it directly with the company’s website. The process will eliminate any potential warranty difficulties with third-party sellers, if you have any issues with the case.
An essential thing to consider using the cases we dismiss below is the fact, unlike along with other groups of products we cover, they are not necessarily bad. Although we’re noting any issues we saw using these cases, a number of them are fine-they only can’t quite match up towards the high quality of our picks.
Combining a rubber skin by using a plastic frame, the Spigen Neo Hybrid is really a slim, attractive case. Its fatal flaw is in its button protection. The silver plastic pill on the Sleep/Wake button doesn’t depress properly, so it may possibly not hit the control underneath, and you likely won’t feel it if this does. Former Sweethome editor Joel Johnson confirmed this concern together with the iPhone 6 Plus version. Because we received this case for testing so early, we think Spigen might revise later editions to address this concern.
Also from Spigen is the Ultra Hybrid, a single-piece case that fuses a rubber frame with a clear plastic back. It’s a good-looking case, but when again, they have difficulties with the buttons. Rather than putting raised material over them, it has right and left edges that are flat all the way through with small indentations. For the Sleep/Wake button, the indented label says “PWR,” and then for volume, you will get plus and minus signs. Without having a more pronounced physical distinction, you may more quickly miss the buttons, as well as the frame moves inward whenever you press.
Twelve South is in the beginning about precisely how protective the SurfacePad is. In the FAQ part of the case’s website, the company says, “SurfacePad for iPhone is just not built to protect iPhone from falls, drops, being run over with a car or dropped within the loo. SurfacePad is supposed to guard your iPhone from scratches and scrapes from things like car keys, nail files or concrete park benches.” It’s actually a lesser case and more of the leather sticker by using a cover. The SurfacePad adheres to the rear of the iPhone, and you may get rid of it and reapply it as a necessary (though accomplishing this is not as elementary as the business would have you feel). We like materials, however the SurfacePad is difficult to recommend unless your main issue is fashion.
The Vault Slim Wallet from Silk can be a much-less-expensive substitute for sister company CM4’s Q Card Case. It’s fundamentally the same design, except rather than faux-leather back, everything is made from TPU. Just like the Q Card Case, the Slim Wallet is capable of holding three cards, but an elevated arch in the card slot causes the cards to curve to a noticeable degree, which can damage the cards with time. The Q Card Case’s positive attributes otherwise carry over, but as a result of card bending, I’m a little wary of the Slim Wallet.
Silk now offers the Armor Tough Case and PureView Clear Case. The Armor Tough Case is a rubber case with interchangeable, polycarbonate-plastic backplates. It’s an excellent case at a reasonable cost, but it’s thicker than than our top pick, the NGP. The PureView Clear Case, on the other hand, is actually a nice pick from the very full class of cases with rubber edges and clear backs, and Silk prices it aggressively. But we’re not terribly fond of this style because of dust’s propensity to get under the transparent back, and because of the ease with which the plastic can scratch. Still, beside others we’ve tested, the PureView Clear Case has pleasant-feeling buttons and well-sized port openings.
With Incipio’s Rival, unlike with all the NGP, merely the border is TPU; all of those other Rival is hard plastic, about .3 mm thicker compared to the NGP. Everything else about the case is basically just like around the NGP, for example the cutouts for the ports and the grade of the button protection. As the Rival is very smooth, just like the NGP, horizontal lines throughout the lower two-thirds from the back give a distinct texture. It isn’t as neutral since the NGP, but if you want the design, it is a great choice.
Tech21’s Evo Mesh, which features the next generation of the company’s shock-absorbing lining, is undoubtedly an Apple Store exclusive. Similar to Tech21’s Classic Shell (more on this design below), it’s a rubber case by using a colored band walking around the perimeter. The dimensions are virtually identical in between the two. There’s something about this one which we like over the Classic Shell, but it’s difficult to put a finger on what that is. Perhaps it’s that the somewhat-obnoxious orange band continues to be replaced by colors matching the various body shades of the case itself. Overall, though, this case is just too pricey for what it gives you.
Plastic and rubber by using a clear back, the ITSKINS Venum Reloaded drops the ball when it comes to within the iPhone’s buttons. Like the setup of Spigen’s Ultra Hybrid, the design from the Venum Reloaded makes virtually no physical distinction involving the button coverage and the other case. This situation have also been relatively expensive when last we checked, and also the plastic border frame feels fragile.
Really a greater portion of a fashion case, the Nitro Forged from ITSKINS currently costs quite a penny at nearly $70. It includes a rubber skin with machined aluminum caps that attach at the very top and bottom. Thankfully, this design is definitely an improvement over previous versions, which required you to work with an included screwdriver to install and remove the caps; instead, it uses small plastic clips that you can put in and remove by hand.
Also from ITSKINS will be the Evolution. A rubber core having a plastic frame, the Evolution has some curves which help help it become feel a little more organic. The major problem is that the screen rises over the side of the truth as an alternative to the opposite. Because of this in the event you drop your handset, there’s a lot more likelihood of problems for the display compared to other cases.
Incipio makes countless cases that people can’t expect great things out from every one. The EDGE can be a plastic slider, a design that’s relatively rare currently. The smooth, matte-finish plastic splits into two pieces for both installation and docking purposes. While it offers proper button coverage plus a nice protective lip, we found the situation to be too tight; pulling it off, specially the bottom cap, is really a struggle.
Weighing a couple of grams over the average of the cases we tested, the DualPro SHINE can be a solid contender from Incipio. It incorporates both plastic and rubber layers, although as opposed to being molded together, they’re two distinct pieces. The rubber is pretty thick but doesn’t dampen the tactility from the buttons whatsoever, plus it still provides acceptable access to the ports. The port openings are identical to the NGP’s. We also examined the conventional DualPro, that features a matte finish. It’s quite nice, but it’s thicker in comparison to the NGP and lacking the mil-spec rating of the CandyShell.
The plastic layer of the DualPro SHINE fits into grooves in the rubber, helping the case feel like a cohesive unit. We think one of the most polarizing thing about this case is its texture: Created to look like brushed aluminum, it certainly doesn’t feel like that, and also at least inside our tests, the effect is really a certain amount of cognitive dissonance. It’s not necessarily a bad thing by any means, but overall it simply doesn’t feel quite as nice since it looks.
If card storage is vital for you, Verus’s Damda is actually a fine case. Our bodies is made from black rubber, with nice button protection and properly centered openings for your headphone port and microphone, the Lightning port, along with the speaker. Connected to the back is really a plastic compartment that adds both mass and depth. A plastic door slides accessible to reveal space for 2, maybe three, charge cards. We initially found it a bit challenging to open, but with some cards inside it’s easier to work alongside yet still secure. This can be a greater portion of a niche market case than our pick.
Verus’s Crystal Mixx offers a transparent window plus a rubber frame. The rear with this one is plastic, that is one of these two drawbacks. In your exposure to iPhone cases, clear plastic scuffs easily and definately will show those scratches within a point of days. This situation may not be so bad in case the frame provided a greater lip. Unfortunately, at .3 mm, it’s one in the shortest lips we saw, and it also could lead to problems when you drop your iPhone.
The Protector Case and Voyager Case from Pelican look a whole lot alike, and each and every model is difficult to get-Pelican doesn’t sell them online, and then in our experience they’ve been reliably available limited to AT&T retail shops. The Protector is actually a bulkier, more-angular undertake the CandyShell design without the additional benefits, so we’d pass upon it. The Voyager adds port protection and funnels the sound in the speakers forward. In addition, it features a belt clip and screen film. We see this model rather than an OtterBox case, as it’s basically overkill. Most people simply don’t need this measure of protection, especially not in case they have to get out of their strategy for finding it.
PureGear’s Slim Shell Case can be found in seven color combinations, including clear-on-clear. This model is tough plastic by using a rubberized but still rigid frame. The metal button covers can be a great addition, improving the case feel more premium. It won’t offer just as much protection being a CandyShell, so it isn’t a top-notch pick, but this one isn’t a negative option in any way.
One of the initial iPhone 6 cases to become publicly sold-we saw it around May 2014-Minisuit’s Frost is an inexpensive TPU skin. While it does fit, they have virtually no lip, along with the holes over the bottom are uneven to the point of looking warped.
Monoprice is recognized for inexpensive products of all sorts. We like a number of the company’s accessories-it will make great cables, for example-but Monoprice cases generally don’t impress. Materials often feel cheap, and other companies offer higher-quality products at similarly the best prices. For instance, the Metal Alloy Protective Case (for sale in gold, silver, and cosmic blue) includes thin, aluminum shell that snaps over a thin TPU skin, with lines matching the iPhone’s antenna breaks. The TPU doesn’t feel as nice since the material that Incipio and also other companies use, as well as the case exposes the Apple logo on the rear of the phone.
Monoprice’s Industrial Metal Mesh Guard Case (in black or white) feels a lttle bit nicer but is much less protective. The plastic shell has carries a cool-looking steel grille over it, however it leaves the best and bottom edges unprotected, and it features the most important Apple-logo opening we’ve seen on any case.
We examined the TPU case from Insignia, a Best Buy brand, plus it appear to be in the same OEM as Monoprice’s TPU case, but in a higher price.
We don’t just like the Monoprice PC TPU Protector Case quite as much, though it does offer arguably more protection. This model splits into two pieces, having an inner skin of TPU along with a polycarbonate shell that snaps into position over it. The way it is is rather simple to assemble, but when it’s together, it just feels big. It’s both wider and thicker compared to NGP, without having obvious advantage aside from price.
Rokform has long dedicated to ruggedized cases that will hook up to an ecosystem of mounting accessories. Its Sport v3 is no exception. This plastic and rubber case includes swappable magnetic backplates that give it time to hook up to various mounting brackets the company sells. Unfortunately, the instruction insert lists a dealbreaker: “Magnet will disable NFC on phone.” These days the organization claims the magnet won’t interfere with Apple Pay or any antennas, but we haven’t tested this.
OtterBox’s Defender Series will be the bulkiest of your cases we’ve tested thus far. This is actually the company’s flagship case, the one most people associate with all the brand. It’s composed of a plastic frame that snaps around the handset plus a thick rubber skin that covers the whole thing. Unlike many other cases, this model includes flaps within the vibration control switch, headphone port, and Lightning port-all positive things on an extra degree of protection. In addition, it includes button coverage, but we discovered that it takes more force to depress the amount and power controls than other cases do.
The Defender Series is also really the only case we’ve tested with built-in screen protection in the form of a clear film incorporated into the frame. Because you end up with a bit of space between your protector along with the screen, very light presses and swipes might not register, that is a drawback. Atop the Touch ID/Home button is actually a thin sheet of plastic that didn’t hinder the experience in your testing. Whilst the Defender Series does expose the Apple logo, the truth at the very least covers it with clear film that prevents it from getting scratched. So when an added bonus, the Defender Series features a belt holster.
Within the OtterBox family, the Commuter Series represents the next step down in overall protection. Instead of plastic on the inside and rubber on the exterior, the layers are reversed. The truth still offers port coverage, nevertheless the switch about the iPhone’s left side remains exposed. Thankfully, the buttons depress much more easily. Instead of a permanent screen protector, OtterBox includes an optional film with this particular case. The Apple logo is once more exposed, this time without having plastic covering it. Apart from the port protection, this case offers no obvious benefits spanning a CandyShell, and also the size is a drawback that keeps this model from earning a top spot.
The Symmetry Series can be a relatively recent accessory for the OtterBox lineup and also the slimmest of which all. It is like a direct solution to the CandyShell, featuring its dual-layer design. This case offers the same level of protection as our top choice plus a substantial lip. It’s taller and wider, though, in a higher price. The biggest benefit is that using a matte-plastic back, it won’t show the scratches a CandyShell does.
OtterBox’s newest case, the Statement Series, is surely an iPhone 6/6s-specific case. An iPhone 6/6s Plus version exists, but unlike OtterBox’s other lines, this series offers no version for older iPhones or any other flagship smartphones. It’s also one in the few OtterBox cases that put aesthetics first, having its large back-panel window and leather-covered lower quarter being its key distinguishing features. We’re testing the Statement right now, and we’ll decide whether or not it should join our picks soon.
The Difficult Candy Cases Candy Clip Series is a pretty crazy proposition: For $30, you receive a hard-plastic X-shaped piece that snaps onto the rear of the iPhone, covering its corners and a number of the edges but leaving the buttons and many of the sides exposed. No thanks.
Urban Armor Gear’s Case is one from the only cases we’ve tested to fulfill military drop-test standards. It’s excellent like a protective case, but its industrial aesthetic lacks the broad appeal of simpler designs like those from Incipio and Speck. UAG also combines plastic and rubber in this instance, but rather than a glossy finish, it uses a matte one, by having an industrial appearance that appropriately matches the brand’s name. With ridges and fake screws, it looks like an issue that would not be out of place with a construction site. We do take problem with the two small, rectangular holes on the back of the situation-about a quarter of how through the top or bottom, respectively, they expose portion of the logo and also the top 1 / 2 of “Phone” in the iPhone label. It’s an unusual design decision on an otherwise impressive case. Alternatively, this model does feature a screen film, whereas most iPhone cases don’t currently.
Tech21’s entire product lineup is founded on D3O, a licensed material the business uses in each and every one of its cases. Mostly within the borders of Tech21 cases, the bright-orange material is supposed to remain soft when at rest but automatically harden upon impact, dissipating the force and ultimately preventing problems for your phone. The business really likes to show off the stuff; each of its cases reaches least translucent, if not transparent, around the edges.
From Tech21, we tested the Classic Shell, Classic Shell Cover, and Classic Shell Flip. The first is the most basic, a glossy TPU skin that’s wider compared to the NGP, because of the layer of D3O. We’d want to see a bigger lip than this case offers, and the buttons can be a bit squishier than we generally prefer. The Classic Shell Cover keeps the same frame but replaces the TPU on the back by using a hard-plastic plate, and it has an attached cover to shield the iPhone’s display. Everything works the same as with the standard model, and also the lid includes a cutout within the earpiece in order to speak around the phone from it closed. The Classic Shell Flip is essentially the same, only instead of plastic this situation has a leather feel (it seems to be the fake stuff), as well as the lid comes around from your bottom instead of the side. We discover that lids get in how more than they help, so neither of the covered models excites us, and the soft buttons and wider body of the Classic Shell prevent it from receiving a recommendation.
From iLuv, we received two cases for evaluation: the Aurora Wave and Gelato. The very first is an easy silicone skin using a grid in the back that glows in the dark. When it comes to body coverage, the way it is lives as much as what we’re looking for, but making this type of design involves the lowest degree of difficulty. As we’ve often found with cases on this style before, the vertical edges can pull from the body of your phone more readily as compared to other cases, allowing dust along with other particulates to get underneath. The Gelato, on the other hand, is TPU iphone7 case manufacturing with an attractive checkerboard pattern in the back. It seems and feels excellent, however the .33-millimeter lip is way too short.
Poetic’s Atmosphere is actually a thin case made from dual-molded polycarbonate plastic and TPU. The softer material rings the leading edge to generate a small lip, and it also runs on the antenna breaks on the back of the phone. Even if this transparent case initially looks like a nice option for people who desire a slim protector but nonetheless want to show off their iPhone, it falls short due to button protectors that need excessive force to press.
Macally shipped us some different cases, but two of them are styles we simply can’t recommend. The Metallic Snap-On Case along with the Flexible Protective Frame come in many different colors, but the former can be a shell, along with the latter is a bumper that protects the sides but leaves the scratchable back exposed. The Durable Protective Case, as opposed, does offer more thorough protection, unfortunately it isn’t a unique design. A mixture TPU skin and hard-plastic frame, this situation kind of appears like an armadillo from your back. We’ve already seen at least one other company supplying the same case, so we weren’t impressed with that case’s aggressive looks either.
New Trent’s Alixo 6S isn’t necessarily the prettiest case around, yet it is one in the more original designs we’ve seen in the pile. This two-piece case is made up of front frame (black- and white-rimmed versions are in the package) along with a silicone rubber and plastic back. You merely snap the phone into your choice of frame after which insert it in to the back piece, including flip-open port protectors. The quantity of protection this model offers for the price is impressive, because it includes a built in screen film and Touch ID coverage. Nevertheless the latter happens to be the Alixo 6S’s downside: While the fingerprint sensor does assist the thin material over it, we found that it is less reliable, requiring more tries to unlock the device.
Marblue’s ToughTek is actually a thick silicone rubber case that comes with a screen protector. Basically we don’t doubt it are able to tolerate some significant drops, the ToughTek is huge-3 inches wide, 5.8 inches tall, and .6 inch deep-and particularly difficult to go into and away from tight pockets as a result of grippy material. It may possibly not be a bad option if you’re handing your iPhone 6 to kids.
The Elite, also from Marblue, takes its inspiration through the CandyShell, while incorporating an Aztec-like pattern. The plastic and rubber layers intersect in horizontal and vertical lines, using the latter material sticking up higher than the hard plastic. One of the most intriguing part of this case is the pair of inch-long ridges, one on both sides. They’re made to work with an array of accessories, such as a belt clip. We’ll be keeping an eye out for such accessories, and we’ll see whether they boost the price of the way it is.
We had high hopes to the Spigen Capella, which is available in multiple colors. Its setup is much like the CandyShell’s, with rubber inside and plastic outside. The large difference, as well as the reason we had been enthusiastic about it, is it’s much slimmer, measuring about 2 mm thinner from front to back. This is certainly partly as a result of smaller, half-millimeter lip round the screen. One of the editors loves the way the case’s slight curve feels, comparing it to the iPhone 3G. Judging through the feedback we’ve seen from readers and Amazon reviewers, lots of people don’t like this shape as much as perform.
Although the Capella isn’t as deep as being the CandyShell, it is actually a bit taller, and about 3 mm wider. This width ends up being problematic for 2 reasons, one on either edge. Around the iPhone’s left side, the switch is much harder to toggle, as it’s deeply recessed within the rubber border; should you don’t have nails to speak of, moving it to and fro will likely be tough. On the other side, the Sleep/Wake button requires a surprising volume of pressure to activate. If you’re willing to cope with those drawbacks, the Capella is otherwise worth taking into consideration like a CandyShell alternative.
Having its Revolution case, Poetic is looking to contend with companies such as OtterBox at a far lower price. The case starts off with a plastic frame that snaps into the front from the iPhone; a precise sheet of plastic protects the screen while leaving the sensors towards the top and also the Touch ID button in the bottom exposed. A rubber and plastic body fits across the back, snapping into position with all the front piece. Everything feels quite sturdy, the buttons click well, and the flap across the Lightning port is really a nice little extra protection.
Supcase’s Unicorn Beetle Pro Holster supplies a similar proposition. The greatest difference between this model and the Revolution is that it comes with a plastic belt holster. Having roughly the identical dimensions as being the Poetic case, this model requires an installation that’s just about exactly the same. This example adds a few flaps for coverage, namely on the side switch and the headphone port besides the Lightning port. While it’s an extremely solid-feeling case, we immediately referred to as company’s claim of dust-proof construction into question, mainly because it leaves openings for dust to get in, such as the fully exposed speaker. Currently, Amazon users are typically interested in it, with 127 reviews and a 4.1-star (from five) rating, but we’ve seen several three- and four-star reviews.
Relative newcomer Supcase has a number of iPhone 6 cases, actually, the majority of that are part of the “Unicorn Beetle” family. The Slim Armored Protective Case is a lot like Urban Armor Gear’s case because it’s protective, but the design is quite specific, meaning it likely won’t appeal to exactly the same wide swath of folks as something much more generic. The plastic and rubber case feels sturdy and has some of the clickiest buttons associated with a we tested. When it comes to lip, it’s no more than .5 mm, so it’s smaller than we’d like, as well as the case makes no mil-spec claims. If you want the design, it’s not a bad choice otherwise.
Supcase also sells the Hybrid Clear Bumper Case, which combines a precise-plastic backplate by using a TPU bumper. That polycarbonate back won’t absorb all the shock because the thick rubber border, but it’s the best way to display Apple’s design.
Within a previous version of the guide, we named Logitech’s Protection [ ] as a more-protective pick. It has a very similar design, with the key benefits of a matte finish and embedded magnets that allow it to connect to mounting accessories. Unfortunately Logitech has confirmed that it’s no longer selling the case, that is currently on clearance at Best Buy.
Hardly any other case we tested is established much the same way as Maxboost’s DuraShield Series (now named DuraSLIM). Like a number of other models, it uses both rubber and plastic components, but here the rubber is really a bumper that wraps throughout the iPhone’s border, as well as the plastic snaps in position over it while covering the back of the handset. Despite the unusual design-or maybe for doing it-the truth offers superior protection compared with many others we’ve seen. It includes a 1-mm lip, plus speaker and Lightning-port protection. It also redirects the audio ports forward, meaning the sound comes to you, rather than down; the design has no affect on audio quality, thankfully. With regards to Lightning port, it stays protected underneath a rubber tab that you can flip out when you really need access.
Few case manufacturers actively warn that their product doesn’t offer drop protection, but just such a message appears in the Amazon listing for Maxboost’s Liquid Skin. Extremely thin, this transparent-TPU case adds very little bulk to the handset, not actually a protective lip. It’s a lot better than a shell as it offers button protection and cutouts for the ports, even if they are quite tight. Although with this kind of warning from the case maker itself, we can’t recommend the Liquid Skin for many people. If you’re going try using a case, you should utilize something that’ll withstand a drop.
Maxboost’s Crystal Cushion and i also-Blason’s Halo Series are almost identical to each other and actually might be small tweaks on the very same reference design. Both have rubber frames-the Halo Series offers six colors, plus clear-with transparent plastic backplates. The Maxboost case’s edges are definitely more squared-off, as the i-Blason’s are rounder. Both offer good body coverage and responsive buttons, although the lip across the screen is nearly nonexistent, especially about the Halo Series. Combine that with the tendency for clear plastic cases to scratch and also to expose trapped dust underneath, and these cases aren’t top picks.
The Maxboost HyperPro Series is perfect for all intents and purposes a thicker version of the Incipio NGP. Available only in black, it uses two layers of TPU to safeguard the iPhone, plus it measures 10.2 mm thick; it’s also wider and taller than our pick. The buttons press well and yes it includes a protective lip, but we can find no real benefit to this situation over the NGP, besides savings of only a few dollars.
One of just a couple slider-style cases on the market, Maxboost’s Vibrance Series offers a different build than many of the cases we tested. A hard-plastic case, it splits into two pieces, both lined having a soft fabric along the back that’s designed to prevent damage during installation and removal. As an alternative to pushing the phone in to the case, you pull off the bottom cap, slide the phone into the top, then push the pieces back together again. Much as with the STM Harbour, these kinds of design allows you to keep your iPhone thoroughly protected most of the time, and also to plug it into docks when needed. The lip is sort of short, though, and pulling off the Vibrance’s bottom cap is harder than flipping within the Harbour’s bottom. Maxboost even offers only one color choice, salmon with a gold cap, which may not interest several people as increasing numbers of basic colors would.
If you find the CandyShell to get too big, you won’t be impressed with Speck’s MightyShell, which is available in black, orange, purple, pink, and clear variants. This model has a few key differences. First is the extra layer of TPU material that helps absorb shocks to a greater degree; it adds 2 mm within both width and height, in addition to .5 mm towards the thickness in the case. Speck claims that this new design will “double MIL-STD-810G drop test standards,” but we can’t tell whether that means the way it is is tested to outlive drops from two times as high or this means the way it is can tolerate the conventional 4-foot drops twice as many times. One aspect of the case we appreciate may be the hard-plastic exterior, which is matte instead of glossy, so it won’t show scratches as readily as being the standard CandyShell. To the price, we expect not only claims of better drop protection; instances through which this example would survive but a CandyShell wouldn’t are way too ambiguous to warrant the charge.
Among ultrathin cases, Shumuri’s SLIM looks and feels very similar to Caudabe’s The Veil XT, down to the absence of the typical Veil’s screen-protection lip. But it’s also missing both Veil models’ camera-lens protector. The same goes for Monoprice’s Ultra-thin Shatter-proof Case (in clear frost, ice blue, and smoke) and Totallee’s The Scarf (for iPhone 6 and iPhone 6 Plus).
Rearth USA’s Ringke Slim (for iPhone 6 and iPhone 6 Plus) offers both a screen-protecting lip and bottom-edge coverage, as well as thicker plastic for extra protection. However, we’re not fans of the aesthetics-because the case’s rigid plastic is thicker, the company has added a compact slit to every corner to make putting the truth on your own phone easier. The design is effective enough; we simply don’t like the way it looks.
Power Support’s Air Jacket and SwitchEasy’s Nude (for iPhone 6 and iPhone 6 Plus) are glossy-plastic cases which are slightly thicker than Caudabe’s The Veil. The previous provides good coverage over the phone’s bottom edge but has only the faintest of any screen-protection lip. The second has neither.
Amzer’s Crusta might not exactly appear to be a fantastic value at $35 (iPhone 6) or $45 (iPhone 6 Plus) since this writing, however the package includes not just a simple case. The way it is itself utilizes a two-piece snap-together design by using a rubber bumper plus a glass back that lets the iPhone’s rear show through. The glass likely won’t show scratches as easily as similar cases we’ve seen by using a plastic back, however, you will still see any dust, hair, or another particulates that get underneath the glass. Amzer includes a second piece of glass to shield the phone’s screen. The truth eventually ends up being bulkier than we prefer-the iPhone 6 version is 14.4 mm thick, such as the phone-but it’s one of your better cases we’ve seen from Amzer, a firm otherwise renowned for inexpensive, nondescript accessories.
NewerTech is famous more for computer accessories than smartphone add-ons, but the company does offer a brand of cases called NuGuard KX (for iPhone 6 and iPhone 6 Plus). Made more for drop protection than sleekness, the NuGuard KX boasts a thick layer of gel material that absorbs and evenly distributes shocks. The situation is very bulky, yet an opening on the rear of the way it is to the phone’s Apple logo actually subtracts through the overall level of protection. We choose the NGP.
We certainly have varying levels of praise for 3 cases from Griffin Technology. The Survivor Slim (for iPhone 6 and iPhone 6 Plus) is our least favorite of those. This bulky rubber case feels more like an accessory for any kid’s toy compared to a smartphone. It can be an excellent case if children frequently make use of phone, but we suspect that many adults will prefer something slimmer.
We like the Survivor Core (for iPhone 6 and iPhone 6 Plus) and All Clear Identity (for iPhone 6 and iPhone 6 Plus) better. Both permit the handset’s back to show through a clear back panel. The previous has rubber edges, as well as its rubber corners protrude a bit, helping cushion the iPhone against drops-although the end result is that it’s just a little bigger than a conventional case. The All Clear Identity, on the other hand, has a transparent back with translucent-rubber edges. The issue, as with most cases sporting a specific back, is both cases show any gunk that gets beneath the plastic. For some people, that could be an acceptable compromise inside a case designed to help you to watch your phone’s own surfaces, but we generally prefer something translucent or opaque. Neither the Survivor Core nor the All Clear identity can be a bad option, but neither particularly excites us.
Belkin’s Grip Case for iPhone 6 is an excellent option to our top pick, however it doesn’t quite make your top tier. The design is nearly the same as that of the Incipio NGP, as it’s a one-piece polyurethane case. The most significant difference is all over the phone’s bottom edge: As opposed to having separate openings for that headphone jack, microphone, Lightning-connector port, and speaker, the case exposes the final two through one long opening. A small indentation in the plastic covering the foot of the phone permits use with accessories including Apple’s Lightning-connector adapters. This is a nice feature that we haven’t seen on other cases, although we worry how the thinness of your material here, in addition to near to the Ring/Silent switch, may make it more vunerable to ripping. Wirecutter editor Michael Zhao also finds the case’s button coverage to be somewhat problematic, because he doesn’t like that they’re nearly flush with the case.
One of the cases shipped to us for consideration, we dismissed a number of models right off the bat. We cut Spigen’s Slim Armor, Slim Armor S, Tough Armor, and Tough Armor S, together with Verus’s Thor, Iron Shield, and Dandy Diary, plus PureGear’s DualTek, for their Apple-logo-exposing holes around the back. They actually do a significant job of protecting your phone otherwise, but we can easily think of absolutely no reason to recommend them for most people when existing hole-free options are pretty much as good or better.
We also dismissed a number of shell cases because, since we mention above, they supply a minimal amount of coverage to the device’s body. Among these were the Aluminum Fit, Thin Fit, and Thin Fit A from Spigen. The same thing goes for the Neo Hybrid EX, Spigen’s bumper case, which offers even less protection.